There are a variety of sensors based on other physical transduction principles like the optical range finding sensors and the microwave based devices too. Then why should one use ultrasonic transducers in the first place, given that the speed of sound is very slow than the speed of electromagnetic waves? The answer lies in the question itself. Because the EM waves based devices are too fast. Being slower that the EM waves, the time taken by ultrasonic waves is much longer than that taken by the latter and hence its measurement can be done more easily and less expensively. Because these are based on sound waves rather than EM waves, these would work in places where the latter would not.
For example, in the case of clear object detection and measurement of liquid levels or high glare environments, light based sensors would suffer greatly because of the transmittance of the target or the translucence of the propagating media. Ultrasonic devices being based upon sound propagation would remain practically unaffected. These also function well in wet environments where optical beams may suffer from refraction from the water droplets in the environment. On account of range and accuracy, the ultrasonic sensors may lie in between two EM wave based sensors, the Infrared rangefinders on the lower end and the LIDARs on the upper end. Not as accurate or long distance as the LIDARs, the Ultrasonic rangefinders fare better than the IR rangefinders which are highly susceptible to ambient conditions and require recalibration when environment changes. Further these devices offer advantage in medical imaging as compared to MRI or X-Ray scans due to inexpensiveness and portability. No harmful effects of ultrasonic waves at the intensity levels used have been detected in contrast to X-rays or radioactivity based methods and is particularly suited for imaging soft tissues.
Problems & Concerns
However, Ultrasonic sensors too aren’t free of all the problems. The speed of sound in a medium increases as the temperature of the medium increases. Thus even when the target has remained in the same place, it may now seem that it has shifted to a place closer to the sensor. Air currents due to varied reasons may disturb the path of the wave which could lead to ‘Missed Detection’ or a wrong measurement.
Acoustic noise like high pitched sounds created due to whistling or hissing of valves and pneumatic devices at the frequency close to the operating frequency may interfere with the output of the sensor. Electrical noise also affects the performance of the sensor. These may generate artifacts which are not a true representation of the imaged object. Just like the vision starts to blur when the distance of the object from the eye gets too small for the eyes to see it, ultrasonic devices also have a ‘dead zone’ where the sensor cannot reliably make measurements. This happens due to a phenomenon called ringing which is the continuous vibration of the transducer after emitting the pulse. Thus when the distance is too small, the transducer has not yet come to rest to be able to differentiate between the vibration due to the incident radiation or the oscillation from the electrical excitation. The dangers of Ultrasonic waves are also well founded. If the intensity is too high, it can cause human tissues to heat and may cause ruptures in people exposed to it. Ethical issues like fetus identification and resulting abortions in medical field are also a widespread concern.
Applications
The applications of ultrasonic sensors can be classified on the basis of the property that they exploit. These can be summarized as:
Domain
|
Parameter
|
Applications
|
Time
|
Tile-of-Flight, Velocity
|
Density, Thickness, Flaw Detection, Anisotropy, Robotics, Remote Sensing etc.
|
Attenuation
|
Fluctuations in reflected and Transmitted Signals
|
Defect characterization, microstructures, interface analysis
|
Frequency
|
Ultrasonic Spectroscopy
|
Microstructure, grain size, porosity, phase analysis.
|
Image
|
Time-of-Flight, velocity, attenuation mapping in Raster C-Scan or SARs
|
Surface and internal Defect imaging, density, velocity, 2D and 3D imaging.
|
Research has been going on to overcome the problems of ultrasonic sensors, particularly in medical imaging where it is known as ultrasound. The artifacts of ultrasonic sensors like Acoustic shadowing and Acoustic Enhancement are being exploited to characterize tissues which allow the differentiation between solid and cystic tissues. The industry too has reaped the benefits from ultrasonic sensors in applications like plastic welding, jewelry cleaning, remote sensing and telemetry, assisted parking systems etc. Robotics has been known to use ultrasonic rangefinders as a favorite tool for distance ranging and mapping. Even the fashion industry is using ultrasonic sensors in hair styling like hair extension implants.
Flaw Detection Using Ultrasonic Sensors
0 comments:
Post a Comment